FEEDBACKSEL=BIT0, XORFEEDBACK=DIRECT, BLOCKERRORCORRECT=X0
No Description
| FEEDBACKSEL | LFSR Feedback selector 0 (BIT0): Select bit 0 as feedback 1 (BIT1): Select bit 1 as feedback 2 (BIT2): Select bit 2 as feedback 3 (BIT3): Select bit 3 as feedback 4 (BIT4): Select bit 4 as feedback 5 (BIT5): Select bit 5 as feedback 6 (BIT6): Select bit 6 as feedback 7 (BIT7): Select bit 7 as feedback 8 (BIT8): Select bit 8 as feedback 9 (BIT9): Select bit 9 as feedback 10 (BIT10): Select bit 10 as feedback 11 (BIT11): Select bit 11 as feedback 12 (BIT12): Select bit 12 as feedback 13 (BIT13): Select bit 13 as feedback 14 (BIT14): Select bit 14 as feedback 15 (BIT15): Select bit 15 as feedback 16 (INPUT): Select data input as feedback 17 (ZERO): Select zero as feedback 18 (ONE): Select one as feedback 19 (TXLASTWORD): In transmit mode, the feedback is one during the last transmit word and zero otherwise. In receive mode, the feedback is always zero. |
| XORFEEDBACK | LFSR Feedback XOR setting 0 (DIRECT): The signal defined by FEEDBACKSEL is used directly as Feedback. 1 (XOR): The signal defined by FEEDBACKSEL is XOR’ed with bit 15, and the result is used as Feedback 2 (ZERO): Feedback is set to 0 |
| SHROUTPUTSEL | Shift Register Output Selector |
| BLOCKERRORCORRECT | Block Errors Correction enable 0 (X0): Block decoding errors are not corrected, only the BLOCKERR interrupt is set on detection. 1 (X1): Block decoding errors are attempted corrected by memory lookup tables. The BLOCKERR interrupt is also set on error detection. |